class Tioga::X_and_Y_Axes

These are the methods and attributes for the plot axes.

See Tutorial::Plots for more information.

Public Instance Methods

axis_information(loc) click to toggle source

Takes the same argument as show_axis, and returns some information about the way the corresponding axis would be organized, in the form of a hash with the following keys:

  • 'major': the position of major ticks

  • 'labels': their corresponding numeric labels (as given to LaTeX, so that includes things like tiogayaxisnumericlabel)

  • 'vertical': whether the axis is vertical or horizontal

  • 'scale', 'shift', 'angle' : the shift, scale and angle of

    the tick labels
  • 'line_width': the axis line width

  • 'x0', 'y0', 'x1', 'y1': the axis position in figure coordinates

  • 'major_tick_width', 'major_tick_length', 'minor_tick_length', 'minor_tick_width': ticks widths and lengths

# File lib/Tioga/X_and_Y_Axes.rb, line 37
def axis_information(loc)
end
bottom_edge_type click to toggle source
bottom_edge_type = an_edge_type

Determines the axis type to use when showing the bottom edge of a plot. Valid types are the following predefined constants: AXIS_HIDDEN, AXIS_LINE_ONLY, AXIS_WITH_MAJOR_TICKS_ONLY, AXIS_WITH_TICKS_ONLY, AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS, and AXIS_WITH_TICKS_AND_NUMERIC_LABELS.

# File lib/Tioga/X_and_Y_Axes.rb, line 130
def bottom_edge_type
end
bottom_edge_visible click to toggle source
bottom_edge_visible = false

If true, then it is okay for tioga to show the bottom edge of a plot. If false, then calls on #show_bottom_edge return immediately. This attribute is “one-way-only” in that it starts true and can be set false, but cannot be reset to true except by restoring the graphics state in which is was still true. This is intended to help control the behavior of plots when embedded as subplots in a larger configuration. Note that this does not effect showing the x axis on the bottom; it only applies to calls on show_bottom_edge.

# File lib/Tioga/X_and_Y_Axes.rb, line 146
def bottom_edge_visible
end
left_edge_type click to toggle source
left_edge_type = an_edge_type

Determines the axis type to use when showing the left edge of a plot. Valid types are the following predefined constants: AXIS_HIDDEN, AXIS_LINE_ONLY, AXIS_WITH_MAJOR_TICKS_ONLY, AXIS_WITH_TICKS_ONLY, AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS, and AXIS_WITH_TICKS_AND_NUMERIC_LABELS.

# File lib/Tioga/X_and_Y_Axes.rb, line 158
def left_edge_type
end
left_edge_visible click to toggle source
left_edge_visible = false

If true, then it is okay for tioga to show the left edge of a plot. If false, then calls on #show_left_edge return immediately. This attribute is “one-way-only” in that it starts true and can be set false, but cannot be reset to true except by restoring the graphics state in which is was still true. This is intended to help control the behavior of plots when embedded as subplots in a larger configuration. Note that this does not effect showing the y axis on the left; it only applies to calls on show_left_edge.

# File lib/Tioga/X_and_Y_Axes.rb, line 174
def left_edge_visible
end
right_edge_type click to toggle source
right_edge_type = an_edge_type

Determines the axis type to use when showing the right edge of a plot. Valid types are the following predefined constants: AXIS_HIDDEN, AXIS_LINE_ONLY, AXIS_WITH_MAJOR_TICKS_ONLY, AXIS_WITH_TICKS_ONLY, AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS, and AXIS_WITH_TICKS_AND_NUMERIC_LABELS.

# File lib/Tioga/X_and_Y_Axes.rb, line 185
def right_edge_type
end
right_edge_visible click to toggle source
right_edge_visible = false

If true, then it is okay for tioga to show the right edge of a plot. If false, then calls on #show_right_edge return immediately. This attribute is “one-way-only” in that it starts true and can be set false, but cannot be reset to true except by restoring the graphics state in which is was still true. This is intended to help control the behavior of plots when embedded as subplots in a larger configuration. Note that this does not effect showing the y axis on the right; it only applies to calls on show_right_edge.

# File lib/Tioga/X_and_Y_Axes.rb, line 200
def right_edge_visible
end
show_axis(loc) click to toggle source

Show one of the plot axes. If loc is LEFT, RIGHT, or AT_X_ORIGIN, and #yaxis_visible is true, then the axis is shown using the current y axis settings. If loc is TOP, BOTTOM, or AT_Y_ORIGIN, and #xaxis_visible is true, then the axis is shown using the current x axis settings.

Sarting from Tioga 1.8, you can specify a dictionary instead of the position. This dictionary must either have a 'location' or a 'from' and 'to' entry to specify the position of the axis. See axis_information for more dictionary entries understood.

NOTE: using a dictionnary bypasses the checks xaxis_visible and yaxis_visible !

[from samples/plots/plots.rb]

# This plot is to demonstrate the new power of #show_axis.
def axes_fun
  t.do_box_labels("Funny axes", "", "")
  t.show_plot([-1, 19, 8, 2]) do
    spec = {
      'from' => [3,3],
      'to' => [3,7],
      'ticks_outside' => true,
      'ticks_inside' => false,
    }
    t.show_axis(spec)
    spec2 = {
      'from' => [12,3],
      'to' => [12,7],
      'ticks_outside' => true,
      'ticks_inside' => false,
      'major_ticks' => [4,6],
      'labels' => ["$a$", "$b$"]
    }
    t.show_axis(spec2)
    spec3 = {
      'from' => [17,3],
      'to' => [17,7],
      'ticks_outside' => true,
      'ticks_inside' => false,
      'labels' => ["$a$", "$b$", 'c', 'd', 'e']
    }
    t.show_axis(spec3)
  end
  t.context do 
    t.set_bounds([-1, 19, 8, 2])
    spec = {
      'from' => [4,1.2],
      'to' => [12,1.2],
      'major_ticks' => [ 4.5, 8.8]
    }
    t.show_axis(spec)
  end
end

# File lib/Tioga/X_and_Y_Axes.rb, line 261
def show_axis(loc)
end
show_bottom_edge click to toggle source

If the flag #bottom_edge_visible is true and the #xaxis_loc is not BOTTOM, then shows the bottom edge of the frame. Otherwise, simply returns.

# File lib/Tioga/X_and_Y_Axes.rb, line 61
def show_bottom_edge
end
show_edge(loc) click to toggle source

Show one of the plot edges. The loc argument must be one of LEFT, RIGHT, TOP, or BOTTOM. Left and right edges are shown using the current y axis settings. Top and bottom edges are shown using the x axis settings. If the corresponding edge_visible attribute has been set false, this command simply returns without doing anything.

# File lib/Tioga/X_and_Y_Axes.rb, line 268
def show_edge(loc)
end
show_left_edge click to toggle source

If the flag #left_edge_visible is true and the #yaxis_loc is not LEFT, then shows the left edge of the frame. Otherwise, simply returns.

# File lib/Tioga/X_and_Y_Axes.rb, line 69
def show_left_edge
end
show_right_edge click to toggle source

If the flag #right_edge_visible is true and the #yaxis_loc is not RIGHT, then shows the right edge of the frame. Otherwise, simply returns.

# File lib/Tioga/X_and_Y_Axes.rb, line 77
def show_right_edge
end
show_top_edge click to toggle source

If the flag #top_edge_visible is true and the #xaxis_loc is not TOP, then shows the top edge of the frame. Otherwise, simply returns.

# File lib/Tioga/X_and_Y_Axes.rb, line 53
def show_top_edge
end
show_xaxis click to toggle source

If the flag #xaxis_visible is currently true, then this routine shows the x axis at the location specified by xaxis_loc. If the flag is false, it simply returns.

# File lib/Tioga/X_and_Y_Axes.rb, line 20
def show_xaxis
end
show_yaxis click to toggle source

If the flag #yaxis_visible is currently true, then this routine shows the y axis at the location specified by yaxis_loc. If the flag is false, it simply returns.

# File lib/Tioga/X_and_Y_Axes.rb, line 45
def show_yaxis
end
top_edge_type click to toggle source
top_edge_type = an_edge_type

Determines the axis type to use when showing the top edge of a plot. Valid types are the following predefined constants: AXIS_HIDDEN, AXIS_LINE_ONLY, AXIS_WITH_MAJOR_TICKS_ONLY, AXIS_WITH_TICKS_ONLY, AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS, and AXIS_WITH_TICKS_AND_NUMERIC_LABELS.

# File lib/Tioga/X_and_Y_Axes.rb, line 103
def top_edge_type
end
top_edge_visible click to toggle source
top_edge_visible = false

If true, then it is okay for tioga to show the top edge of a plot. If false, then calls on #show_top_edge return immediately. This attribute is “one-way-only” in that it starts true and can be set false, but cannot be reset to true except by restoring the graphics state in which is was still true. This is intended to help control the behavior of plots when embedded as subplots in a larger configuration. Note that this does not effect showing the x axis on the top; it only applies to calls on show_top_edge.

# File lib/Tioga/X_and_Y_Axes.rb, line 119
def top_edge_visible
end
xaxis_digits_max click to toggle source
xaxis_digits_max = an_integer_value

If non-zero (and #xaxis_use_fixed_pt is not true), then x axis numeric labels will be switched to exponential format if they require more than this number of digits. If #yaxis_digits_max is set to zero, then a system-choosen default value is used instead. See also xaxis_use_fixed_pt.

# File lib/Tioga/X_and_Y_Axes.rb, line 346
def xaxis_digits_max
end
xaxis_line_width click to toggle source
xaxis_line_width = a_float

Value for the line_width attribute when painting the x axis line.

# File lib/Tioga/X_and_Y_Axes.rb, line 467
def xaxis_line_width
end
xaxis_loc click to toggle source
xaxis_loc = a_location

Determines the location of the x axis. Valid locations are given as the following predefined constants: BOTTOM, TOP, and AT_Y_ORIGIN.

# File lib/Tioga/X_and_Y_Axes.rb, line 292
def xaxis_loc
end
xaxis_locations_for_major_ticks click to toggle source
xaxis_locations_for_major_ticks = a_dvector_or_nil

If nil, then tioga will pick locations for major ticks on the x axis. Otherwise, this should be Dvector of locations in x figure coordinates in strictly increasing order.

# File lib/Tioga/X_and_Y_Axes.rb, line 398
def xaxis_locations_for_major_ticks
end
xaxis_locations_for_minor_ticks click to toggle source
xaxis_locations_for_minor_ticks = a_dvector_or_nil

If nil, then tioga will pick locations for minor ticks on the x axis. Otherwise, this should be Dvector of locations in x figure coordinates in strictly increasing order.

# File lib/Tioga/X_and_Y_Axes.rb, line 407
def xaxis_locations_for_minor_ticks
end
xaxis_log_values click to toggle source
xaxis_log_values = true_or_false

If true, then locations along the x axis are to be treated as log values (base 10). This changes both the default placing of tick marks and the appearance of numeric labels.

# File lib/Tioga/X_and_Y_Axes.rb, line 425
def xaxis_log_values
end
xaxis_major_tick_length click to toggle source
xaxis_major_tick_length = a_float

Length of major ticks on the x axis measured in units of the default text height.

# File lib/Tioga/X_and_Y_Axes.rb, line 451
def xaxis_major_tick_length
end
xaxis_major_tick_width click to toggle source
xaxis_major_tick_width = a_float

Value for the line_width attribute when painting the x axis major tick marks.

# File lib/Tioga/X_and_Y_Axes.rb, line 475
def xaxis_major_tick_width
end
xaxis_min_between_major_ticks click to toggle source
xaxis_min_between_major_ticks = a_float

When tioga picks the interval between major tick marks on the x axis, it will ensure that the interval is at least this large. Note that this distance is given in units of the default text height rather than in x coordinates.

# File lib/Tioga/X_and_Y_Axes.rb, line 377
def xaxis_min_between_major_ticks
end
xaxis_minor_tick_length click to toggle source
xaxis_minor_tick_length = a_float

Length of minor ticks on the x axis measured in units of the default text height.

# File lib/Tioga/X_and_Y_Axes.rb, line 459
def xaxis_minor_tick_length
end
xaxis_minor_tick_width click to toggle source
xaxis_minor_tick_width = a_float

Value for the line_width attribute when painting the x axis minor tick marks.

# File lib/Tioga/X_and_Y_Axes.rb, line 483
def xaxis_minor_tick_width
end
xaxis_number_of_minor_intervals click to toggle source
xaxis_number_of_minor_intervals = an_integer_value

Determines the number of minor intervals making up the distance between major ticks marks on the x axis. If this is set to 0, then tioga will pick the number.

# File lib/Tioga/X_and_Y_Axes.rb, line 367
def xaxis_number_of_minor_intervals
end
xaxis_numeric_label_alignment click to toggle source
xaxis_numeric_label_alignment = an_alignment

The alignment setting for numeric labels on the x axis. See also tex_xaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 529
def xaxis_numeric_label_alignment
end
xaxis_numeric_label_angle click to toggle source
xaxis_numeric_label_angle = a_float_in_degrees

Numeric labels on the x axis are rotated by this angle from vertical. See also tex_xaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 520
def xaxis_numeric_label_angle
end
xaxis_numeric_label_decimal_digits click to toggle source
xaxis_numeric_label_decimal_digits = an_integer_value

If non-negative, then use this number of digits after the decimal when creating numeric labels for the x axis. See also tex_xaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 335
def xaxis_numeric_label_decimal_digits
end
xaxis_numeric_label_frequency click to toggle source
xaxis_numeric_label_frequency = an_integer

The frequency setting for numeric labels on the x axis. Major ticks are numbered from 0 at the small x end of the axis. Tick number k gets a label only if mod(i+j,k)==0 where j=xaxis_numeric_label_phase and k=xaxis_numeric_label_frequency. The default for #xaxis_numeric_label_frequency is 1 so that every major tick gets a label. See also xaxis_numeric_label_phase.

# File lib/Tioga/X_and_Y_Axes.rb, line 555
def xaxis_numeric_label_frequency
end
xaxis_numeric_label_justification click to toggle source
xaxis_numeric_label_justification = a_justification

The justification setting for numeric labels on the x axis. See also tex_xaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 538
def xaxis_numeric_label_justification
end
xaxis_numeric_label_phase click to toggle source
xaxis_numeric_label_phase = an_integer

The phase setting for numeric labels on the x axis. The default phase is 0. See #xaxis_numeric_label_frequency for details.

# File lib/Tioga/X_and_Y_Axes.rb, line 565
def xaxis_numeric_label_phase
end
xaxis_numeric_label_scale click to toggle source
xaxis_numeric_label_scale = a_float

Scaling factor relative to default_text_scale for the numeric labels on the x axis in plots. See also tex_xaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 500
def xaxis_numeric_label_scale
end
xaxis_numeric_label_shift click to toggle source
xaxis_numeric_label_shift = a_float

Distance to shift the reference point for showing numeric labels on the x axis measured in character heights with positive directed out away from the plot for x axis on top or bottom, or toward positive y values for x axis at y origin. See also tex_xaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 511
def xaxis_numeric_label_shift
end
xaxis_numeric_label_tex click to toggle source
xaxis_numeric_label_tex = a_string

The string for a numeric label is put in this TeX command string to be formatted. For example, `$#1$' will give the numbers in math mode, while `$mathsf{#1}$' will show the label using the math sans-serif font.

# File lib/Tioga/X_and_Y_Axes.rb, line 313
def xaxis_numeric_label_tex
end
xaxis_reversed click to toggle source

Flag is true if the bounds_left is not the bounds_xmin.

# File lib/Tioga/X_and_Y_Axes.rb, line 84
def xaxis_reversed
end
xaxis_stroke_color click to toggle source
xaxis_stroke_color = color_value

Value for the stroke_color attribute when painting the x axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 491
def xaxis_stroke_color
end
xaxis_tick_interval click to toggle source
xaxis_tick_interval = a_float

If 0, then tioga will pick the interval between major tick marks on the x axis. Otherwise, this will be used as the interval in x coordinates for the spacing between major ticks.

# File lib/Tioga/X_and_Y_Axes.rb, line 872
def xaxis_tick_interval
end
xaxis_tick_labels click to toggle source
xaxis_tick_labels = array_or_nil

If nil, then tioga will create numeric labels for the major ticks on the x axis. Otherwise, you must also specify #xaxis_locations_for_major_ticks, and #xaxis_tick_labels must be an equal length array of strings giving the corresponding labels.

See also yaxis_tick_labels.

# File lib/Tioga/X_and_Y_Axes.rb, line 389
def xaxis_tick_labels
end
xaxis_ticks_inside click to toggle source
xaxis_ticks_inside = true_or_false

If true, then ticks will be added along the x axis inside the plot frame. If false, then no ticks will appear inside the frame along the x axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 434
def xaxis_ticks_inside
end
xaxis_ticks_outside click to toggle source
xaxis_ticks_outside = true_or_false

If true, then ticks will be added along the x axis outside the plot frame. If false, then no ticks will appear outside the frame along the x axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 443
def xaxis_ticks_outside
end
xaxis_type click to toggle source
xaxis_type = an_axis_type_value

Determines the axis type to use when showing the x axis of a plot. Valid types are the following predefined constants: AXIS_HIDDEN, AXIS_LINE_ONLY, AXIS_WITH_MAJOR_TICKS_ONLY, AXIS_WITH_TICKS_ONLY, AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS, and AXIS_WITH_TICKS_AND_NUMERIC_LABELS.

# File lib/Tioga/X_and_Y_Axes.rb, line 303
def xaxis_type
end
xaxis_use_fixed_pt click to toggle source
xaxis_use_fixed_pt = true_or_false

If this flag is true, then numeric labels for the x axis will always use fixed point notation rather than exponential. If false, then the value of #xaxis_digits_max will be used to decide between fixed point or exponential notation. See also xaxis_digits_max.

# File lib/Tioga/X_and_Y_Axes.rb, line 358
def xaxis_use_fixed_pt
end
xaxis_visible click to toggle source
xaxis_visible = false

If true, then it is okay for tioga to show the x axis of a plot. If false, then calls on #show_axis for the x axis return immediately. This attribute is “one-way-only” in that it starts true and can be set false, but cannot be reset to true except by restoring the graphics state in which is was still true. This is intended to help control the behavior of plots when embedded as subplots in a larger configuration. Note that this does not effect showing the top or bottom edges; it only applies to calls on show_axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 283
def xaxis_visible
end
yaxis_digits_max click to toggle source
yaxis_digits_max = an_integer_value

If non-zero (and #yaxis_use_fixed_pt is not true), then y axis numeric labels will be switched to exponential format if they require more than this number of digits. If #yaxis_digits_max is set to zero, then a system-choosen default value is used instead. See also yaxis_use_fixed_pt.

# File lib/Tioga/X_and_Y_Axes.rb, line 651
def yaxis_digits_max
end
yaxis_line_width click to toggle source
yaxis_line_width = a_float

Value for the line_width attribute when painting the y axis line.

# File lib/Tioga/X_and_Y_Axes.rb, line 792
def yaxis_line_width
end
yaxis_loc click to toggle source
yaxis_loc = a_location

Determines the location of the y axis. Valid locations are given as the following predefined constants: LEFT, RIGHT, and AT_X_ORIGIN.

# File lib/Tioga/X_and_Y_Axes.rb, line 619
def yaxis_loc
end
yaxis_locations_for_major_ticks click to toggle source
yaxis_locations_for_major_ticks = a_dvector_or_nil

If nil, then tioga will pick locations for major ticks on the y axis. Otherwise, this should be Dvector of locations in y figure coordinates in strictly increasing order.

See also yaxis_tick_labels.

# File lib/Tioga/X_and_Y_Axes.rb, line 732
def yaxis_locations_for_major_ticks
end
yaxis_locations_for_minor_ticks click to toggle source
yaxis_locations_for_minor_ticks = a_dvector_or_nil

If nil, then tioga will pick locations for minor ticks on the y axis. Otherwise, this should be Dvector of locations in x figure coordinates in strictly increasing order.

# File lib/Tioga/X_and_Y_Axes.rb, line 741
def yaxis_locations_for_minor_ticks
end
yaxis_log_values click to toggle source
yaxis_log_values = true_or_false

If true, then locations along the y axis are to be treated as log values (base 10). This changes both the default placing of tick marks and the appearance of numeric labels.

# File lib/Tioga/X_and_Y_Axes.rb, line 750
def yaxis_log_values
end
yaxis_major_tick_length click to toggle source
yaxis_major_tick_length = a_float

Length of major ticks on the y axis measured in units of the default text height.

# File lib/Tioga/X_and_Y_Axes.rb, line 776
def yaxis_major_tick_length
end
yaxis_major_tick_width click to toggle source
yaxis_major_tick_width = a_float

Value for the line_width attribute when painting the y axis major tick marks.

# File lib/Tioga/X_and_Y_Axes.rb, line 800
def yaxis_major_tick_width
end
yaxis_min_between_major_ticks click to toggle source
yaxis_min_between_major_ticks = a_float

When tioga picks the interval between major tick marks on the y axis, it will ensure that the interval is at least this large. Note that this distance is given in units of the default text height rather than in y coordinates.

# File lib/Tioga/X_and_Y_Axes.rb, line 681
def yaxis_min_between_major_ticks
end
yaxis_minor_tick_length click to toggle source
yaxis_minor_tick_length = a_float

Length of minor ticks on the y axis measured in units of the default text height.

# File lib/Tioga/X_and_Y_Axes.rb, line 784
def yaxis_minor_tick_length
end
yaxis_minor_tick_width click to toggle source
yaxis_minor_tick_width = a_float

Value for the line_width attribute when painting the y axis minor tick marks.

# File lib/Tioga/X_and_Y_Axes.rb, line 808
def yaxis_minor_tick_width
end
yaxis_number_of_minor_intervals click to toggle source
yaxis_number_of_minor_intervals = an_integer_value

Determines the number of minor intervals making up the distance between major ticks marks on the y axis. If this is set to 0, then tioga will pick the number.

# File lib/Tioga/X_and_Y_Axes.rb, line 672
def yaxis_number_of_minor_intervals
end
yaxis_numeric_label_alignment click to toggle source
yaxis_numeric_label_alignment = an_alignment

The alignment setting for numeric labels on the y axis. See also tex_yaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 854
def yaxis_numeric_label_alignment
end
yaxis_numeric_label_angle click to toggle source
yaxis_numeric_label_angle = a_float_in_degrees

Numeric labels on the y axis are rotated by this angle from horizontal. See also tex_yaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 845
def yaxis_numeric_label_angle
end
yaxis_numeric_label_decimal_digits click to toggle source
yaxis_numeric_label_decimal_digits = an_integer_value

If non-negative, then use this number of digits after the decimal when creating numeric labels for the y axis. See also tex_yaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 640
def yaxis_numeric_label_decimal_digits
end
yaxis_numeric_label_frequency click to toggle source
yaxis_numeric_label_frequency = an_integer

The frequency setting for numeric labels on the y axis. Major ticks are numbered from 0 at the small y end of the axis. Tick number k gets a label only if mod(i+j,k)==0 where j=yaxis_numeric_label_phase and k=yaxis_numeric_label_frequency. The default for #yaxis_numeric_label_frequency is 1 so that every major tick gets a label. See also yaxis_numeric_label_phase.

# File lib/Tioga/X_and_Y_Axes.rb, line 582
def yaxis_numeric_label_frequency
end
yaxis_numeric_label_justification click to toggle source
yaxis_numeric_label_justification = a_justification

The justification setting for numeric labels on the y axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 863
def yaxis_numeric_label_justification
end
yaxis_numeric_label_phase click to toggle source
yaxis_numeric_label_phase = an_integer

The phase setting for numeric labels on the y axis. The default phase is 0. See #yaxis_numeric_label_frequency for details.

# File lib/Tioga/X_and_Y_Axes.rb, line 592
def yaxis_numeric_label_phase
end
yaxis_numeric_label_scale click to toggle source
yaxis_numeric_label_scale = a_float

Scaling factor relative to default_text_scale for the numeric labels on the y axis in plots. See also tex_yaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 825
def yaxis_numeric_label_scale
end
yaxis_numeric_label_shift click to toggle source
yaxis_numeric_label_shift = a_float

Distance to shift the reference point for showing numeric labels on the y axis measured in character heights with positive directed out away from the plot for y axis on left or right, or toward positive x values for y axis at x origin. See also tex_yaxis_numeric_label.

# File lib/Tioga/X_and_Y_Axes.rb, line 836
def yaxis_numeric_label_shift
end
yaxis_numeric_label_tex click to toggle source
yaxis_numeric_label_tex = a_string

The string for a numeric label is put in this TeX command string to be formatted. For example, `$#1$' will give the numbers in math mode, while `$mathsf{#1}$' will show the label using the math sans-serif font.

# File lib/Tioga/X_and_Y_Axes.rb, line 323
def yaxis_numeric_label_tex
end
yaxis_reversed click to toggle source

Flag is true if the bounds_bottom is not the bounds_ymin.

# File lib/Tioga/X_and_Y_Axes.rb, line 91
def yaxis_reversed
end
yaxis_stroke_color click to toggle source
yaxis_stroke_color = color_value

Value for the stroke_color attribute when painting the y axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 816
def yaxis_stroke_color
end
xaxis_numeric_label_decimal_digits click to toggle source
xaxis_numeric_label_decimal_digits = an_integer_value

If 0, then tioga will pick the interval between major tick marks on the y axis. Otherwise, this will be used as the interval in y coordinates for the spacing between major ticks.

# File lib/Tioga/X_and_Y_Axes.rb, line 416
def yaxis_tick_interval
end
yaxis_tick_labels click to toggle source
yaxis_tick_labels = array_or_nil

If nil, then tioga will create numeric labels for the major ticks on the y axis. Otherwise, you must also specify #yaxis_locations_for_major_ticks, and #yaxis_tick_labels must be an equal length array of strings giving the corresponding labels.

See also xaxis_tick_labels.

Examples

def special_y
    t.ylabel_shift += 2
    t.do_box_labels('Special Y Axis', 'Position', 'Y Values')
    t.yaxis_numeric_label_angle = -90
    t.yaxis_locations_for_major_ticks = [ 
        -10.0, -6.0, -PI, 0.0, PI, 6.0, 10.0 ]
    t.yaxis_tick_labels = [ 
        "-IX", "-VI", "$-\\pi$", "$\\mathcal{ZERO}$", "$\\pi$", "VI", "IX" ]
    t.yaxis_type = AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS
    t.stroke_color = Blue
    t.yaxis_numeric_label_justification = RIGHT_JUSTIFIED
    t.right_edge_type = AXIS_WITH_MAJOR_TICKS_ONLY
    t.yaxis_numeric_label_shift = 0
    xs = @positions; ys = @big_blues
    t.show_plot('boundaries' => plot_boundaries(xs,ys,@margin,-11, 11)) do
        t.append_points_to_path(xs,ys)
        t.stroke
    end
end

# File lib/Tioga/X_and_Y_Axes.rb, line 720
def yaxis_tick_labels
end
yaxis_ticks_inside click to toggle source
yaxis_ticks_inside = true_or_false

If true, then ticks will be added along the y axis inside the plot frame. If false, then no ticks will appear inside the frame along the y axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 759
def yaxis_ticks_inside
end
yaxis_ticks_outside click to toggle source
yaxis_ticks_outside = true_or_false

If true, then ticks will be added along the y axis outside the plot frame. If false, then no ticks will appear outside the frame along the y axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 768
def yaxis_ticks_outside
end
yaxis_type click to toggle source
yaxis_type = an_axis_type_value

Determines the axis type to use when showing the y axis of a plot. Valid types are the following predefined constants: AXIS_HIDDEN, AXIS_LINE_ONLY, AXIS_WITH_MAJOR_TICKS_ONLY, AXIS_WITH_TICKS_ONLY, AXIS_WITH_MAJOR_TICKS_AND_NUMERIC_LABELS, and AXIS_WITH_TICKS_AND_NUMERIC_LABELS.

# File lib/Tioga/X_and_Y_Axes.rb, line 630
def yaxis_type
end
yaxis_use_fixed_pt click to toggle source
yaxis_use_fixed_pt = true_or_false

If this flag is true, then numeric labels for the y axis will always use fixed point notation rather than exponential. If false, then the value of #yaxis_digits_max will be used to decide between fixed point or exponential notation. See also yaxis_digits_max.

# File lib/Tioga/X_and_Y_Axes.rb, line 663
def yaxis_use_fixed_pt
end
yaxis_visible click to toggle source
yaxis_visible = false

If true, then it is okay for tioga to show the y axis of a plot. If false, then calls on #show_axis for the y axis return immediately. This attribute is “one-way-only” in that it starts true and can be set false, but cannot be reset to true except by restoring the graphics state in which is was still true. This is intended to help control the behavior of plots when embedded as subplots in a larger configuration. Note that this does not effect showing the left or right edges; it only applies to calls on show_axis.

# File lib/Tioga/X_and_Y_Axes.rb, line 610
def yaxis_visible
end